View 43FDX15B_5295021.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

projection color tv 53fdx20b 43fdx20b 53sdx20b 43FDX15B 53sdx20bb operating guide important safety instructions 2-3 first time use 4-18 remote control ultratec bit-map on-screen display useful information index 61-66 30-60 19-29 customize setup video audio theater sel as an e nergy s tar ? partner, hitachi, ltd. has determined that this product meets the e nergy s tar ? guidelines for energy efficiency. http://www..net/ datasheet pdf - http://www..net/
2 important safety instructions safety points you should know about your hitachi television our reputation has been built on the quality, performance, and ease of service of hitachi televisions. safety is also foremost in our minds in the design of these units. to help you operate these products properly, this section illustrates safety tips which will be of benefit to you. please read it carefully and apply the knowledge you obtain from it to the proper operation of your hitachi television. please fill out your warranty card and mail it to hitachi. this will enable hitachi to notify you promptly in the improbable event that a safety problem should be discovered in your product model. follow all warnings and instructions marked on this color television. caution risk of electric shock do not open caution: to reduce the risk of electric shock, do not remove cover (or back). no user serviceable parts inside. refer servicing to qualified service personnel. the lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ?dangerous voltage? within the product?s enclosure that may be of a sufficient magnitude to constitute a risk of electric shock to persons. the exclamation point within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. w arning: to prevent fire or shock hazard, do not expose this television to rain or moisture. note: ? there are no user serviceable parts inside the color television. ? model and serial numbers are indicated on back side of the television. ? this television is not intended for use in a computer room. power source this television is designed to operate on 120 volts 60hz, ac current. insert the power cord into a 120 volt 60hz outlet. to prevent electric shock, do not use the color television?s (polarized) plug with an extension cord, receptacle, or other outlet unless the blades and ground terminal can be fully inserted to prevent blade exposure. never connect the color television to 50hz, direct current, or anything other than the specified voltage. caution: never remove the back cover of the television as this can expose you to very high voltages and other hazards. if the television does not operate properly, unplug the television and call your authorized dealer or service center. note: this television receiver will display television closed captioning, ( or ), in accordance with paragraph 15.119 of the fcc rules. caution: adjust only those controls that are covered in the instructions, as improper changes or modifications not expressly approved by hitachi could void the user?s authority to operate the television. modifications: the fcc requires the user to be notified that any changes or modifications made to this device that are not expressly approved by hitachi america, ltd. home electronics division may void the user?s authority to operate the equipment. http://www..net/ datasheet pdf - http://www..net/
3 important safety instructions read before operating equipment follow all warnings and instructions marked on this television. 1. read these instructions. 2. keep these instructions. 3. heed all warnings. 4. follow all instructions. 5. do not use this apparatus near water. 6. clean only with a dry cloth. 7. do not block any ventilation openings. install in accordance with the manufacturer?s instructions. 8. do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. do not defeat the safety purpose of the polarized or grounding-type plug. a polarized plug has two blades with one wider than the other. a grounding type plug has two blades and a third grounding prong. the wide blade or the third prong are provided for your safety. if the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11 . only use the attachments/accessories specified by the manufacturer. 12. use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. when a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. unplug this apparatus during lightning storms or when unused for long periods of time. 14. refer all servicing to qualified service personnel. servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. t elevisions are designed to comply with the recommended safety standards for tilt and stability. do not apply excessive pulling force to the front, or top, of the cabinet which could cause the product to overturn resulting in product damage and/or personal injury. 16. follow instructions for wall, shelf or ceiling mounting as recommended by the manufacturer. 17. an outdoor antenna should not be located in the vicinity of overhead power lines or other electrical circuits. 18. if an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. section 810 of the national electric code, ansi/nfpa no. 70-1984, provides information with respect to proper grounding for the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna-discharge unit, connection to grounding electrodes and requirements for the grounding electrode. note to the catv system installer: this reminder is provided to call the catv system installer?s attention to article 820-40 of the nec that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

do not place any objects on the top of the television which may fall or cause a child to climb to retrieve the objects. disposal of this product may require specific instructions pertaining to your resident state. for disposal or recycling information, please contact your local authorities or the electronic industries alliance: www.eiae.org. prevention of p a ttern burn continuous on-screen displays such as video games, stock market quotations, computer generated graphics, and other fixed (non- moving) patterns can cause permanent damage to television receivers. such ?pattern burns? constitute misuse and are not covered by your hitachi factory warranty. when using the picture-in-picture function, the sub-picture should not be left permanently in one corner of the screen or a ?pattern burn? may develop over a long period of time. public viewing of copyrighted material public viewing of programs broadcast by tv stations and cable companies, as well as programs from other sources, may require prior authorization from the broadcaster or owner of the video program material. http://www..net/ datasheet pdf - http://www..net/
4 accessories 1. remote control unit clu-4322ug (part no. hl01832). 2. two ?aa? size, 1.5v batteries (for remote control unit). remote control battery installation and replacement 1. open the battery cover of the remote control by pushing the notched part of the cover with your fingers and pulling the cover off. 2. insert two new ?aa? size batteries for the remote control. when replacing old batteries, push them towards the springs and lift them out. 3. match the batteries to the (+) and (-) marks in the battery compartment. 4. replace the cover. bottom view lift up on tab to remove back cover. check to make sure you have the following accessories before disposing of the packing material. caution: danger of explosion if battery is incorrectly replaced. replace with the same or equivalent type. caution: te levision stand model sp-43h is designed for use with a 43 inch or smaller television set. use of a smaller stand, a non hitachi recommended stand or a generic stand may result in instability, causing possible injury. 123 456 789 0 ant status vol ch power tv cbl/sat dvd/vcr pip swap pip mode freeze help pip ch menu mute exit last ch rec aspect mode select part name part no. illustration clu-4322ug remote control hl01832 1. 2. 43? television stand sp-43h (not included, order separately) optional h530047 custom hitachi television stand excellent for vcr and video-tape storage. special features include smoked glass doors and an adjustable shelf. available in shark grey. clu-4322ug vid1 vid2 vid3 vid4 vid5 http://www..net/ datasheet pdf - http://www..net/
5 how to set up your new hitachi projection tv caution: magnetic fields, such as those of external speakers, may cause the picture to distort if they are placed too close to the television. move the magnetic field source away from the television until there is no picture distortion.

antenna unless your tv is connected to a cable tv system or to a centralized antenna system, a good outdoor color tv antenna is recommended for best performance. however, if you are located in an exceptionally good signal area that is free from interferen ce and multiple image ghosts, an indoor antenna may be sufficient. location select an area where sunlight or bright indoor illumination will not fall directly on the picture screen. also, be sure that t he location selected allows a free flow of air to and from the perforated back cover of the set. to avoid cabinet warping, cabinet color changes, and increased chance of set failure, do not place the tv where temperatures ca n become excessively hot, for example, in direct sunlight or near a heating appliance, etc. viewing the major benefit of the hitachi projection television is its large viewing screen. to see this large screen at its best, test various locations in the room to find the optimum spot for viewing. the best picture is seen by sitting directly in front of the tv and about 10 to 18 feet from the screen. picture brightness de creases as the viewer moves to the left and right of the receiver. during daylight hours, reflections from outside light may appear on the screen. if so, drapes or screens can be used to reduce the reflection or the tv can be located in a different section of the room. if the tv?s audio output will be connected to a hi-fi system?s external speakers, the best audio performance will be obtained b y placing the speakers equidistant from each side of the receiver cabinet and as close as possible to the height of the picture screen ce nter. for best stereo separation, place the external speakers at least four feet from the side of the tv, place the surround speakers to the side or behind the viewing area. differences in room sizes and acoustical environments will require some experimentation with speak er placement for best performance. http://www..net/ datasheet pdf - http://www..net/
6 hook-up cables and connectors most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. for best performance, video cables should use 75-ohm coaxial shielded wire. cables can be purchased from most stores that sell audio/video products. below are illustrations and names of common connectors. before purchasing any cables, be sure of the ou tput and input connector types required by the various components and the length of each cable. 300-ohm twin lead connector this outdoor antenna cable must be connected to an antenna adapter (300-ohm to 75-ohm). phono connector used on all standard video and audio cables which connect to inputs and outputs located on the television?s rear jack panel and front control panel. ''f'' type 75-ohm coaxial antenna connector for connecting rf signals (antenna or cable tv) to the antenna jack on the television. s-video (super video) connector this connector is used on camcorders, vcrs, and laserdisc players with an s-video feature in place of the standard video cable to produce a high quality picture. antenna connections to rear jack panel vhf (75-ohm) antenna/catv (cable tv) when using a 75-ohm coaxial cable system, connect the outdoor antenna or catv coaxial cable to the ant a (75-ohm) terminal. if you have a second antenna or cable tv system, connect the coaxial cable to the ant b terminal. vhf (300-ohm) antenna/uhf antenna when using a 300-ohm twin lead from an outdoor antenna, connect the vhf or uhf antenna leads to screws of the vhf or uhf adapter. plug the adapter into the antenna terminal on the tv. when both vhf and uhf antennas are connected attach an optional antenna cable mixer to the tv antenna terminal, and connect the cables to the antenna mixer. consult your dealer or service store for the antenna mixer.

http://www..net/ datasheet pdf - http://www..net/
7 front panel controls notes: 1. your hitachi projection tv will appear to be turned off if there is no video input when video: 1, 2, 3, 4 or 5 is selected. check the power light to make sure the tv is turned off when not in use. 2. to see an auto-demonstration of the on-screen displays with help text displayed, press and hold the power button on the tv set for approximately five seconds. press the power button on the tv again to end the auto- demonstration. front view menu/select button this button allows you to enter the menu, making it possible to set tv features to your preference without using the remote. t his button also serves as the select button when in menu mode. input/exit button press this button to select the current antenna source, video: 1, 2, 3, 4, 5 or alternate antenna source. your selection is sh own in the top right corner of the screen. this button also serves as the exit button when in menu mode. channel selector press these buttons until the desired channel appears in the top right corner of the tv screen. these buttons also serve as the cursor down ( ) and up ( ) buttons when in menu mode. volume level press these buttons for your desired sound level. the volume level will be displayed on the tv screen. these buttons also ser ve as the cursor left ( ) and right ( ) buttons when in menu mode. power button press this button to turn the tv on or off. / magic focus power input exit select push open door and pull forward and down push power input exit vol+ vol- ch- ch+ vol+ vol- ch- ch+ menu select menu notes: y our remote control does not have an input button. to change to video inputs, press vid1~vid5 buttons depending on your choice (see page 21). http://www..net/ datasheet pdf - http://www..net/
8 front panel controls power light y ou will see a red light when the tv is turned on. perfect picture sensor the perfect picture sensor will make automatic picture adjustments depending on the amount of light in the room to give the bes t picture. (see page 57) remote control sensor point your remote at this area when selecting channels, adjusting volume, etc. magic focus use this button to adjust your picture quality to optimum performance. (see page 39) front input jacks (for video: 3) use these audio/video jacks for a quick hook-up from a camcorder or vcr to instantly view your favorite show or new recording. press the input button until video: 3 appears in the top right corner of the tv screen. if you have mono sound, insert the audi o cable into the left audio jack. http://www..net/ datasheet pdf - http://www..net/
9 front panel jacks and connections the front panel jacks are provided as a convenience to allow you to easily connect a camcorder or vcr as shown in the following examples: note: 1. completely insert connection cord plugs when connecting to front panel jacks. if you do not, the played back picture may be abnormal. 2. if you have a s-vhs vcr, use the s-input cable in place of the standard video cable. 3. if you have a mono vcr, insert the audio cable into the left audio jack of your tv. !" #$ " %& '

( ) * *+ *+!," input output http://www..net/ datasheet pdf - http://www..net/
10 rear panel jacks antenna input/output the remote control allows you to switch between two separate 75-ohm rf antenna inputs, ant a and ant b. ant a input can be displayed as a main picture or sub-picture. ant b can only be displayed as a main picture. (ant b cannot be displayed as a sub-picture.) the antenna output labeled ?to converter? allows the ant a connection to pass directly to a different source such as a cable box, only when ant b is displayed as a main picture. audio/video inputs 1, 2, 4 and 5 the vid1~vid5 buttons will select each video source each time it is pressed. use the audio and video inputs to connect external devices, such as vcrs, camcorders, laserdisc players, dvd players etc. (if you have mono sound, insert the audio cable into th e left audio jack.) monitor out these jacks provide fixed audio and video signals which are used for recording. use the s-video output for high quality video output. audio to hi-fi output these jacks provide variable audio output to a separate stereo amplifier. with this connection, the audio to the stereo can be controlled by the television?s main volume. s-video inputs 1 and 2 inputs 1 and 2 provide s-video (super video) jacks for connecting equipment with s-video output capability. p b p r audio to hi-fi ant a to converter ant b p b p r monitor out input 1 audio (mono) l r audio l r s-video s-video video video audio l r (mono) s-video video y/video r l audio l r l r y/video audio input 2 input 4 input 5 (mono) (mono) note: y ou may use video or s-video inputs to connect to input 1 and 2, but only one of these inputs may be used at a time. note: s-video output may be used for recording, only when the input is of s-video type. http://www..net/ datasheet pdf - http://www..net/
11 rear panel jacks component: y-p b p r inputs inputs 4 and 5 provide y-p b p r jacks for connecting equipment with this capability, such as a dvd player or set top box. you may use standard video signal for input:4 and 5. notes: 1. y our component outputs may be labeled y, b-y, and r-y. in this case, connect the components b-y output to the tv?s p b input and the components r-y output to the tv?s p r input. 2. your component outputs may be labeled y-c b c r . in this case, connect the component c b output to the tv?s p b input and the component c r output to the tv?s p r input. 3. it may be necessary to adjust tint to obtain optimum picture quality when using the y-p b p r inputs. (see pages 55 and 56.) 4. to ensure no copyright infringement, the monitor out output will be abnormal, when using the y-p b p r jacks. 5. when using y-p b p r input, only 480i signal can be viewed as a sub-picture. 6. input 4 and 5 (y/video) can be used for standard video input. http://www..net/ datasheet pdf - http://www..net/
12 p b p r audio to hi-fi p b p r monitor out input 1 audio (mono) l r audio l r s-video s-video video video audio l r (mono) s-video video y/video r l audio l r l r y/video audio input 2 input 4 input 5 (mono) (mono) ant a to converter ant b dvd player stereo system amplifier laserdisc player, vcr, camcorder, etc. vcr #2 cable tv box optional, see tips on page 13 vcr #1 outside antenna or cable tv coaxial cable 2-way signal splitter optional, see tips on page 13 output y p b p r l r hdtv set-top box v l r output s-video ant in output s-video vl r output yp b /c b p r /c r l r lr input optional, see tips on page 13 v l r input s-video input output rear panel connections note: 1. connect only 1 component to each input jack. 2. follow connections that pertain to your personal entertainment system. typical full-feature setup http://www..net/ datasheet pdf - http://www..net/
13 tips on rear panel connections tips on rear panel connections s-video connections are provided for high performance laserdisc players, vcrs etc. that have this feature. use these connections in place of the standard video connection if your device has this feature. if your device has only one audio output (mono sound), connect it to the left audio jack on the television. refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up cables. a single vcr can be used for vcr #1 and vcr #2, but note that a vcr cannot record its own video or line output (input: 1 in the example on page 12). refer to your vcr operating guide for more information on line input-output connections. y ou may use video or s-video inputs to connect to input 1 or input 2, but only one of these may be used at a time. connect only 1 component (vcr, dvd player, camcorder, etc.) to each input jack. component: y-p b p r (input 4 &5) connections are provided for high performance components, such as dvd players and set- top-boxes. use these connections in place of the standard video connection if your device has this feature. y our component outputs may be labeled y, b-y, and r-y. in this case, connect the components b-y output to the tv?s p b input and the components r-y output to the tv?s p r input. y our component outputs may be labeled y-c b c r . in this case, connect the components c b output to the tv?s p b input and the components c r output to the tv?s p r input. y ou may use standard video signal for input:4 and 5. it may be necessary to adjust tint to obtain optimum picture quality when using the y-p b p r inputs. (see pages 55 and 56.) to ensure no copyright infringement, the monitor out output will be abnormal, when using the y-p b p r jacks. http://www..net/ datasheet pdf - http://www..net/
14 connecting external audio sources p b p r audio to hi-fi p b p r monitor out input 1 audio (mono) l r audio l r s-video s-video video video audio l r (mono) s-video video y/video r l audio l r l r y/video audio input 2 input 4 input 5 (mono) (mono) ant a to converter ant b rl input stereo system amplifier to audio input terminal of external amplifier connecting external audio amplifier to control the audio level of an external audio amplifier with the remote control, connect the system as shown below. note: to prevent damage to the speaker and distorted sound, set the volume control of the audio amplifier lower and adjust the sound using the remote control of the tv set. rear panel of television http://www..net/ datasheet pdf - http://www..net/
15 connecting external video sources the exact arrangement you use to connect the vcr, camcorder, laserdisc player, dvd player, or hdtv set top box to your tv set is dependent on the model and features of each component. check the owner?s manual of each component for the location of video and audio inputs and outputs. the following connection diagrams are offered as suggestions. however, you may need to modify them to accommodate your particular assortment of components and features. for best performance, video and audio cables should be made from coaxial shielded wire. before operating external video source the input mode is changed every time the vid1~vid5 button is pressed as shown below. connect an external source to the input terminal, then press the vid1~vid5 button as necessary to view the input source. (see page 16) input mode selection order (antenna) (input) vid1 ant ant a v ideo:1 vid1 connecting a monaural audio source to input1~input5 1. connect the cable from the video out of the vcr or the laserdisc player to the input (video) jack, as shown on the tv set below. 2. connect the cable from the audio out of the vcr or the laserdisc player to the input (mono)/l(audio) jack. 3. press the vid1~vid5 button to view the program from the vcr or the laserdisc player. the video mode disappears automatically after approximately eight seconds. 4. press the ant button to return to the previous channel. note: when the tv is set to video and a video signal is not received from the video input jack on the back panel of the tv (i.e., vcr/laserdisc player, etc. is not connected or the video device is off), the set will appear to be off. p b p r audio to hi-fi p b p r monitor out input 1 audio (mono) l r audio l r s-video s-video video video audio l r (mono) s-video video y/video r l audio l r l r y/video audio input 2 input 4 input 5 (mono) (mono) ant a to converter ant b hitachi model or similar model video out audio out vcr back of vcr http://www..net/ datasheet pdf - http://www..net/
16 connecting external video sources connecting a stereo source to input1~input5 1. connect the cable from the video out of the vcr or the laserdisc player to the input (video) jack, as shown on the tv set below. 2. connect the cable from the audio out r of the vcr or the laserdisc player to the input (audio/r) jack. 3. connect the cable from the audio out l of the vcr or the laserdisc player to the input (audio/l) jack. 4. press the vid1~vid5 button to view the program from the vcr or laserdisc player. the video icon disappears automatically after approximately eight seconds. 5. press the ant button to return to the previous channel. p b p r audio to hi-fi p b p r monitor out input 1 audio (mono) l r audio l r s-video s-video video video audio l r (mono) s-video video y/video r l audio l r l r y/video audio input 2 input 4 input 5 (mono) (mono) ant a to converter ant b hitachi model or similar model back of vcr v l r vcr output notes: 1. completely insert the connection cord plugs when connecting to rear panel jacks. the picture and sound that is played back will be abnormal if the connection is loose. 2. a single vcr can be used for vcr #1 and vcr #2, but note that a vcr cannot record its own video or line output. (input: 1 in example on page 12) refer to your vcr operating guide for more information on line input- output connections. http://www..net/ datasheet pdf - http://www..net/
17 connecting external video sources connecting an s-video source to input 1, 2 and 3 1. connect the cable from the s-video out of the vcr or the laserdisc player to the input (s-video) jack, as shown on the tv set below. 2. connect the cable from the audio out r of the vcr or the laserdisc player to the input (audio/r) jack. 3. connect the cable from the audio out l of the vcr or the laserdisc player to the input (audio/l) jack. 4. press the vid1~vid3 button to view the program from the vcr or laserdisc player. the video icon disappears automatically after approximately eight seconds. 5. press the ant button to return to the previous channel. p b p r audio to hi-fi p b p r monitor out input 1 audio (mono) l r audio l r s-video s-video video video audio l r (mono) s-video video y/video r l audio l r l r y/video audio input 2 input 4 input 5 (mono) (mono) ant a to converter ant b hitachi model or similar model rear panel of television vcr or laserdisc player v l r output s-video see tips on pa ge 13 notes: 1. completely insert the connection cord plugs when connecting to rear panel jacks. the picture and sound that is played back will be abnormal if the connection is loose. 2. a single vcr can be used for vcr #1 and vcr #2, but note that a vcr cannot record its own video or line output. (input: 1 in example on page 12) refer to your vcr operating guide for more information on line input- output connections. back of vcr http://www..net/ datasheet pdf - http://www..net/
18 connecting external video sources connecting a component source to video 4 or 5: y-p b p r . 1. connect the cable from the y out of the laserdisc/dvd player or hdtv set top box to the input (y) jack, as shown on the tv set below. 2. connect the cable from the c b /p b out or b-y out of the laserdisc/dvd player or hdtv set top box to the input (p b) jack. 3. connect the cable from the c r /p r out or r-y out of the laserdisc/dvd player or hdtv set top box to the input (p r ) jack. 4. connect the cable from the audio out r of the laserdisc/dvd player or hdtv set top box to the input (audio/r) jack. 5. connect the cable from the audio out l of the laserdisc/dvd player or hdtv set top box to the input (audio/l) jack. 6. press the vid4~vid5 button, to view the program from the laserdisc/dvd player or hdtv set top box. the video icon disappears automatically after approximately eight seconds. 7. press the ant button to return to the previous channel. p b p r audio to hi-fi p b p r monitor out input 1 audio (mono) l r audio l r s-video s-video video video audio l r (mono) s-video video y/video r l audio l r l r y/video audio input 2 input 4 input 5 (mono) (mono) ant a to converter ant b rear panel of television output p r/ c r p b/ c b y l r audio video dvd player or hitachi model or similar model back of dvd player output lr y p b p r hdtv set-top box note: 1. you may use standard video signal for input:4 and 5. 2. completely insert the connection cord plugs when connecting to rear panel jacks. the picture and sound that is played back will be abnormal if the connection is loose. 3. see page 13 for tips on rear panel connections. http://www..net/ datasheet pdf - http://www..net/
19 the remote control in addition to controlling all the functions on your hitachi projection tv, the new remote control is designed to operate diffe rent types of vcrs, cbl (cable tv) converters, satellite receiver, dvd players, and other audio/video equipment with one touch. basic operation keys are grouped together in one area. to operate your tv, point the remote control at the remote sensor of the tv and press the tv button. the remote will now contro l your television. to operate your cable/satellite box, point the remote at the remote sensor of the cable/satellie box and press the cable/satelllite (cbl/sat) button. the remote will now control your cable/satellite box. (see page 27 for instructions on how to program the remote to control your cable box.) to operate your dvd/vcr player, point the remote at the remote sensor of the dvd/vcr player and press the dvd/vcr button. the remote will now control your dvd/vcr player. (see pages 26 and 28 for instruction on how to program the remote to control your dvd/vcr player.) these buttons allow the remote to control your tv, vcr, dvd or cable/satellite box depending on which mode is chosen, as explained above. aspect button when the remote is in the tv or vcr mode, this is the tv/vcr button. tv or vcr/dvd buttons when in tv mode, these buttons, except the rec button, will select from five video input sources. when in vcr/dvd mode, these buttons transmit the chosen precoded vcr/dvd codes. 123 456 789 0 ant status vol ch power tv cbl/sat dvd/vcr pip swap pip mode freeze help menu mute exit last ch rec aspect mode select pip ch clu-4322ug vid1 vid2 vid3 vid4 vid5 http://www..net/ datasheet pdf - http://www..net/
20 how to use the remote to control your tv power button press this button to turn the tv set on or off when the remote is in tv mode. picture-in-picture buttons see separate section on pages 23, 24 and 25 for description. help button press this button when a menu is displayed to view help text, which gives a description of the displayed menu. the help text will be displayed every time a menu is displayed, until this button is pressed again. select, menu, cursor buttons use these buttons to set or adjust all of the on-screen display features. volume, mute button press the volume up ( ) or down ( ) button until you obtain the desired sound level. to reduce the sound to one half of normal volume (soft mute) to answer the telephone, etc., press the mute button. press the mute button again to turn the sound off completely (mute). to restore the sound, press the mute button one more time, or press the volume up ( ) button. closed captioning will display when mute/soft mute is on and closed caption is set to auto (see page 54). volume, mute buttons 123 456 789 0 status vol ch power tv cbl/sat dvd/vcr pip swap freeze help menu mute exit last ch rec aspect mode select pip ch select, menu, cursor buttons picture-in-picture help button channel selector buttons ant button pip ch button tv power button exit button last channel (last ch) button status button mode button ant pip mode clu-4322ug vid1 vid2 vid3 vid4 vid5 vid1~vid5 buttons aspect button menu button v olume 8 mute 8 soft mute 8 mute mute http://www..net/ datasheet pdf - http://www..net/
21 how to use the remote to control your tv channel selector buttons use these buttons to select the channel you wish to watch. antenna button the ant button will select between antenna a and antenna b each time the button is pressed. vid1 ~ vid5 buttons when the remote control is in tv mode, press these buttons to directly select the video input sources between the five video in puts. aspect button press this button to quickly change the picture formats aspect ratio. (see page 40 for more information) mode button press this button repeatedly to direct access theater mode between sport, news, movie, and music. status button press this button when no menu is displayed when you want to check the channel being received, the picture source, if the chann el has stereo (st) or second audio program (sap), the time and channel id. exit button when in menu mode, this button will exit all on-screen displays. ant b 28 ant a 10 when an s-video input is connected to video: 1. when a component video: y-p b p r input is connected to video: 4. s - in: 1 y- p b p r : 4 ant a 10 abcd 10:00pm pip ant a 12 stereo st/sa audio broadcast audio selected main picture source channel id t ime sub-picture source pip ant a 28 taka video:1 vid1 stereo st/sa video:2 vid2 video:4 vid4 video:5 vid5 video:3 vid3 vid5 vid2 vid3 vid4 vid1 ant ant http://www..net/ datasheet pdf - http://www..net/
22 how to use the remote to control your tv last channel (last ch) button use this button to select between the last two channels viewed. (good for watching two sporting events, etc.) pip ch button use the pip ch button to select between main picture and sub-picture tuning. the channel number which is highlighted indicates which channel is being controlled. menu button the menu button will start the on-screen display. ant a 10 ant a 39 last ch http://www..net/ datasheet pdf - http://www..net/
23 picture-in-picture (pip) notes: 1. when using y-p b p r input, only 480i signal can be viewed as a sub-picture. 2. when ant b is selected as the main channel, the swap feature is disabled. 3. only sound from the main picture can be heard. ant a 10 pip video:1 main picture sub picture ant a 10 p b p r audio to hi-fi p b p r monitor out input 1 audio (mono) l r audio l r s-video s-video video video audio l r (mono) s-video video y/video r l audio l r l r y/video audio input 2 input 4 input 5 (mono) (mono) ant a to converter ant b hitachi model or similar model back of vcr v l r vcr output pip y our hitachi projection tv incorporates dual tuner technology designed for improved viewing enjoyment. this dual tuner feature allows you to view antenna inputs on both the main picture and sub-picture simultaneously, with separate tuning control for eac h. the dual tuner can operate with only one input (ant a only) or two inputs (ant a and ant b). ant a input can be viewed as both the main picture and the sub-picture simultaneously. ant b can only be viewed as a main picture . to select between main picture and pip sub-picture tuning, press the pip ch button on the remote. the highlighted channel displa y will move with every press of the pip ch button. when the top channel display is highlighted, channel tuning is for the main picture . when the lower channel display is highlighted, channel tuning is for the pip sub-picture. the picture-in-picture feature is convenient when you want to watch more than one program at the same time. you can watch a tv program while viewing other programs from the ant a source or any of the video inputs. use above connection to view vcr program as a sub-picture while viewing another program as main picture (ant a, ant b, v:2, v :3, v:4, or v:5). you may also view the vcr program as a main picture while viewing another program as a sub-picture (ant a, v :2, v:3, v:4, or v:5). pip button press the pip button and a sub-picture will appear in one of the two different modes (single or surf), depending on the last selection of the pip mode. to change the pip mode, use the pip mode button to cycle through the two different modes. single mode pip press the pip button and a sub-picture appears in one corner of the screen. press the pip button again to remove the sub-picture from the screen. use the pip ch button to select between main and sub-picture tuning control (indicated by highlighted channel display.) press the vid1, vid2, vid3, vid4 or vid5 button when sub-picture channel tuning is being controlled, to change betw een video: 1, video: 2, video: 3, video:4 and video:5 and ant:a source. (ant b source cannot be viewed as a sub-picture.) pip power tv cbl/sat dvd/vcr pip swap pip mode freeze help menu mute exit last ch pip ch , select http://www..net/ datasheet pdf - http://www..net/
24 picture-in-picture (pip) notes: 1. if no buttons are pressed when in surf mode, auto-scanning will continuously scan channels in memory. (see pages 35 and 36) 2. if a channel is tuned during this surf scanning, sub-pictures will be removed from the screen. 3. surf mode pip is allowed only when ant a is selected as the main channel. 4. if parental control movie/tv ratings setting is on, pip surf mode will be deactivated. 5, closed caption will not appear when pip surf mode is on. notes: 1. the swap button will only operate in single pip mode. 2. the swap function will not operate if ant b input is set as the main channel (ant b input cannot be displayed as a sub-picture.) picture-in-picture cont. surf mode pip this feature will automatically scan all active channel numbers (those set in memory) and display them as pip sub-pictures, alon g the right edge of the screen. press the pip button a second time to remove the sub-pictures from the screen. swap button if you wish to switch what is being shown on the main picture to the sub-picture, press the swap button. ant a 28 ant a 10 v ideo: 1 v ideo: 1 ant a 10 ant a 10 v ideo: 1 09 10 12 pip mode button to change between the two different pip modes (single or surf) press the pip mode button when pip is on. each press of this button will change pip to a different mode. pressing this button two times will cycle through both pip modes. single pip pip ant a 10 v ideo: 1 ant a 10 v ideo: 1 notes: surf mode pip is only allowed when ant a is the main picture. swap pip mode pip mode http://www..net/ datasheet pdf - http://www..net/
25 picture-in-picture (pip) freeze button (with pip on) if you wish to freeze the sub-picture, press the freeze button. this is convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. to return the picture to motion, press the freeze button again. freeze button (with pip off) press the freeze button to freeze the picture, depending on the mode selected (single or strobe). to change freeze modes, use the pip mode button to cycle through the two different modes. single freeze press the freeze button to freeze one frame of the picture you are currently viewing. press this button again or pip to return to normal viewing. caution: a pattern burn may develop if the sub-picture is left in the same corner permanently. if the pip feature is used frequently, occasionally move the sub-picture using the cursor , , , or . notes: each freeze frame is delayed about 0.1 (1/10) second. note: the freeze function will only operate when single pip mode is chosen. hot springs clay mask c/o john doe run-spa retreat p .o. box 55512 any town, usa 98765 check or money order only 1-800-555-1212 hot springs clay mask c/o chau/chan run-spa retreat p.o. box 55512 any town, usa 98765 check or money order only ant a 10 strobe freeze(with pip off) press the freeze button to freeze three frames of the picture you are currently viewing. press this button again or pip to retur n to normal viewing. this feature is useful for viewing a moving picture that has many details, for example, a close play in a sp orting freeze freeze pip mode freeze freeze http://www..net/ datasheet pdf - http://www..net/
26 using the remote to control vcr functions operating the precoded function for your vcr. this remote is designed to operate different types of vcrs. you must first program the remote to match the remote system of yo ur vcr. (refer to page 29 for pre-codes) 1. turn on your vcr. 2. aim the remote control at the front of your vcr. 3. press and release the dvd/vcr button to switch to vcr pre-coded mode. 4. hold down the dvd/vcr button on the remote and enter the two digit preset code that matches your vcr, as shown on page 29. 5. aim the remote at the vcr and press the power button. the remote will turn off your vcr when the correct two digit preset cod e is entered. when this occurs, the remote control is programmed for your vcr. if the vcr does not turn off, try a different tw o digit preset code. 6. the remote will now control your vcr. notes: 1. if your vcr cannot be operated after performing the above procedures, your vcr?s code has not been precoded into the remote. 2. in the unlikely event that your vcr cannot be operated after performing the above procedures, please consult your vcr operating guide. 3. the remote control will remember the codes you have programmed until the batteries are removed from the remote control. after replacing the batteries repeat the entire programming procedure as stated above. dvd/vcr button this button allows the remote to control your vcr by setting it to vcr mode. precoded vcr buttons these buttons transmit the chosen precoded vcr codes. for some vcrs, you must press the record button twice to record a program. exclusive tv buttons these buttons are for operating the tv. 123 456 789 0 ant status vol ch power tv cbl/sat dvd/vcr pip swap pip mode freeze help menu mute exit last ch rec aspect mode select pip ch clu-4322ug vid1 vid2 vid3 vid4 vid5 my vcr code is: note: refer to instruction manual of the vcr for operation of the buttons exclusively for the vcr. http://www..net/ datasheet pdf - http://www..net/
using the remote to control cable/satellite box functions 27 operating the precoded function for your cable/satellite box. this remote is designed to operate different types of cable/satellite boxes. you must first program the remote to match the rem ote system of your cable/satellite box. (refer to page 29) 1. turn on your cable/satellite box. 2. aim the remote control at the front of your cable/satellite box. 3. press and release the cable/satellite (cbl/sat) button to switch to cable/satellite pre-coded mode. 4. hold down the cbl/sat button on the remote and enter the two digit preset code that matches your cable/satellite box as shown on page 29. 5. aim the remote at the cable/satellite box and press the power button. the remote will turn off your cable/satellite box when the correct two digit preset code is entered. when this occurs, the remote control is programmed for your cable/satellite box. if the box does not turn off, try a different two digit preset code. 6. the remote will now control your cable/satellite box. notes: 1. if your cable/satellite box cannot be operated after performing the above procedures, your cable/satellite box code has not been precoded into the remote. 2. in the unlikely event that your cable/satellite box cannot be operated after performing the above procedures, please consult your cable/satellite box operating guide. 3. the remote control will remember the codes you have programmed until the batteries are removed from the remote control. after replacing the batteries repeat the entire programming procedure as stated above. cable (cbl/sat) button this button allows the remote to control your cable/satellite box by setting it to cable/satellite mode. precoded cable/satellite box buttons these buttons transmit the chosen precoded cable/satellite codes. exclusive tv buttons these buttons are for operating the tv. 123 456 789 0 ant status vol ch power tv cbl/sat dvd/vcr pip swap pip mode freeze help menu mute exit last ch rec aspect mode select pip ch clu-4322ug vid1 vid2 vid3 vid4 vid5 my cable/satellite box code is: note: refer to instruction manual of the cable/satellite box for operation of the buttons exclusively for the cable/satellite box. http://www..net/ datasheet pdf - http://www..net/
28 using the remote to control dvd functions operating the precoded function for your dvd player. this remote is designed to operate different types of dvd players. you must first program the remote to match the remote syste m of your dvd player. (refer to page 29 for pre-codes) 1. turn on your dvd player. 2. aim the remote control at the front of your dvd player. 3. press and release the dvd/vcr button to switch to dvd pre-coded mode. 4. hold down the dvd/vcr button on the remote and enter the two digit preset code that matches your dvd player, as shown on page 29. 5. aim the remote at the dvd player and press the power button. the remote will turn off your dvd player when the correct two digit preset code is entered. when this occurs, the remote control is programmed for your dvd player. if the dvd player does not turn off, try a different two digit preset code. 6. the remote will now control your dvd player. notes: 1. if your dvd player cannot be operated after performing the above procedures, your dvd player?s code has not been precoded into the remote. 2. in the unlikely event that your dvd player cannot be operated after performing the above procedures, please consult your dvd player operating guide. 3. the remote control will remember the codes you have programmed until the batteries are removed from the remote control. after replacing the batteries repeat the entire programming procedure as stated above. dvd/vcr button this button allows the remote to control your dvd player by setting it to dvd mode. precoded dvd buttons these buttons transmit the chosen precoded dvd codes. exclusive tv buttons these buttons are for operating the tv. 123 456 789 0 ant status vol ch power tv cbl/sat dvd/vcr pip swap pip mode freeze help menu mute exit last ch rec aspect mode select pip ch clu-4322ug vid1 vid2 vid3 vid4 vid5 my dvd player code is: note: refer to instruction manual of the dvd player for operation of the buttons exclusively for the dvd player. http://www..net/ datasheet pdf - http://www..net/
29 cable, satellite, vcr, and dvd codes cable brand code general instrument . . . . . . . . . . . . . . . . . . . . . . . . .17 hamlin . . . . . . . . . . . . . . . . . . . . . . . . . . .22,23,24,25 jerrold . . . . . . . . . . . . . . .00,01,02,03,04,05,06,07,21 oak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26,27,28 panasonic . . . . . . . . . . . . . . . . . . . . . . . . . . .18,19,20 pioneer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13,14 scientific atlanta . . . . . . . . . . . . . . . . . . . . . .08,09,10 t ocom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15,16 zenith . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11,12 satellite brand code ecostar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 hitachi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 hughes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 panasonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 rca . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30, 35 samsung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 vcr brand code aiwa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 daewoo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 emerson . . . . . . . . . . . . . . . . . . . . . . .20,21,22,23,24 fisher . . . . . . . . . . . . . . . . . . . . . . . . . . .34,37,38,39 funai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 general electric . . . . . . . . . . . . . . . . . . . . . . . . . . .33 goldstar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 hitachi . . . . . . . . . . . . . . . . . . . .00,01,02,03,04,05,06 jvc . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18,49,50,51 magnavox . . . . . . . . . . . . . . . . . . . . . . . . . .12,13, 14 mitsubishi . . . . . . . . . . . . . . . . . . . . . . . . .27,28,29,30 nec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40,41 panasonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10,11 philips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 samsung . . . . . . . . . . . . . . . . . . . . . . . . . . .17,25,26 scott . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 sharp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31,32 shintom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .07,08,09 symphonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 t eknica . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 t oshiba . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 dvd brand code hitachi . . . . . . . . . . . . . . . . . . . . . . . . . . . .53, 59, 60 panasonic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 pioneer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 rca . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 samsung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 sanyo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 t oshiba . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 http://www..net/ datasheet pdf - http://www..net/
ultratec osd customize setup video audio theater sel 30 1. press menu on the remote control to display the different features on your hitachi projection tv. 2. press cursor , , , to highlight a different feature. 3. press exit on the remote control to quickly exit from a menu. 4. press help on the remote control when a menu is displayed, and text will appear giving a description of that menu. help menu exit select -&$-

-. .-

/
0 -&$-

-..--

0 to quit exit customize setup video audio theater sel set menu language plug & play set antenna/cable set channel memory edit channel memory v iew channel list set the clock magic focus picture formats http://www..net/ datasheet pdf - http://www..net/
ultratec osd customize setup video audio theater sel 31 setup set menu language choose english, french, or spanish text. plug & play optimum hook up for your system. set antenna/cable select antenna or cable tv. set channel memory first time set up for channel buttons. edit channel memory channel buttons, add or skip. v iew channel list check channel name, scan, and child lock. set the clock set before using timer features. magic focus automatically match red, green, and blue colors to make white. picture formats select the aspect ratio. name the channels label channels pay1, abc, etc. name the inputs label video inputs vcr1, dvd1, etc. set favorite ch. allows you to set and view favorite channels. set parental locks block channel picture and sound. set program timer turn tv on and off once, daily, or weekly. v ideo input sensor automatically turn tv on to video:4 input. closed caption feature to display dialogue/text. menu background select from two types of backgrounds. contrast adjust contrast. brightness adjust brightness. color adjust color. t int adjust tint. sharpness adjust sharpness. reset set video settings to factory preset. advanced improve picture performance. settings bass adjust bass. t reble adjust treble. balance adjust balance. reset set audio settings to factory preset. advanced improve sound performance. theater modes picture and sound are automatically set. surround special sound effects with and technology. customize video audio theater http://www..net/ datasheet pdf - http://www..net/
set up setup 32 select setup when setting your tv up for the first time. use the cursor or on the remote to highlight the function desired. note: to see an auto-demonstration of the on-screen displays with help text displayed, press and hold the power button on the tv set for approximately five seconds. press the power button on the tv again to end the auto-demonstration. this feature will allow you to select any one of three different languages for all on-screen displays. use cursor or to highlight set menu language of your choice. press the select button to select the highlighted language. press exit to quit menu or cursor to return to previous menu. set menu language exit exit customize setup video audio theater sel press select to set setup sel cursor cursor set menu language english plug & play francais set antenna/cable espa?ol set channel memory edit channel memory v iew channel list set the clock magic focus picture formats menu to menu bar to quit set menu language english plug & play francais set antenna/cable espa?ol set channel memory edit channel memory v iew channel list set the clock magic focus picture formats menu to menu bar to quit setup exit customize setup video audio theater sel menu to quit set menu language plug & play set antenna/cable set channel memory edit channel memory v iew channel list set the clock magic focus picture formats use cursor or to select the sub-menu of your choice. http://www..net/ datasheet pdf - http://www..net/
set up setup 33 this graphic guide function will help you to properly set up your tv or home theater system. simply answer three questions and a graphic will be displayed, showing you the optimum setup for your personalized system. press cursor or to highlight the correct answers to all three questions. press cursor to display the graphic guide. press exit to quit menu or cursor to begin set channel memory. (see page 35) plug & play set menu language plug & play set antenna/cable set channel memory edit channel memory v iew channel list set the clock magic focus picture formats question 1. my tv signal comes from: a) antenna or cable (without cable box) b) cable box c) satellite receiver d) satellite receiver (with cable box) press , to select press select to enter question 2. i w ant to connect a vcr/dvd to my system. a) yes b) no press , to select press select to enter question 3. i w ant to connect a set top box to my system a) yes b) no press , to select press select to enter menu to menu bar to exit quit menu to menu bar to exit quit menu to menu bar to exit quit menu to menu bar to exit quit welcome to your plug & play on screen set up guide. after answering three simple questions, this system will show you typical connections for your tv, cable, vcr, dvd set top box, or satellite receiver. (for detailed connections refer to owners guide) press select to start menu to menu bar to exit quit customize setup video audio theater sel cursor select select select http://www..net/ datasheet pdf - http://www..net/
set up setup 34 select antenna if you are using an indoor or outdoor antenna. select catv if you have cable tv. use cursor or to highlight the correct signal mode. press the select button to select highlighted signal. press exit to quit menu or cursor to return to previous menu. reception channels for each mode are shown at the left. refer to your cable or tv guide for channel identification standards. if certain catv channels are poor or not possible in catv1 mode, select catv2. set antenna/cable set menu language plug & play set antenna/cable antenna set channel memory catv 1 edit channel memory catv 2 v iew channel list set the clock magic focus picture formats set menu language plug & play set antenna/cable antenna set channel memory catv 1 edit channel memory catv 2 v iew channel list set the clock magic focus picture formats set menu language plug & play set antenna/cable antenna set channel memory catv 1 edit channel memory catv 2 v iew channel list set the clock magic focus picture formats menu to menu bar to quit exit menu to menu bar to quit exit customize setup video audio theater sel menu to menu bar to quit exit menu to menu bar to quit exit press select to set setup sel press select to set setup sel press select to set setup sel cursor cursor select set menu language plug & play set antenna/cable antenna set channel memory catv 1 edit channel memory catv 2 v iew channel list set the clock magic focus picture formats reception band catv 1 or catv 2 air vhf 2 ~ 13ch uhf 14 ~ 69ch catv channel vhf 2~13 mid band a~1 a-5 ~ a-1 super band j~w hyper band w + 1 ~ w + 28 ultraband w + 29 ~ w + 84 indicated on the screen 2 ~ 13 14 ~ 22 95 ~ 99 23 ~ 36 37 ~ 64 65 ~ 125 http://www..net/ datasheet pdf - http://www..net/
set up setup 35 this feature will automatically store active tv channels in set channel memory. this will allow you to skip unused channels when using channel up ( ) or down ( ). if the exit button is pressed while set channel memory function is engaged, programming will stop. if two antenna are connected, switch antenna inputs with the ant button and repeat set channel memory for the second antenna input. remember to select the correct antenna/cable mode before using set channel memory. see edit channel memory to add or to erase additional channels. set channel memory menu to menu bar to quit exit menu to menu bar to quit exit menu to menu bar to quit exit set channel memory set menu language plug & play set antenna/cable set channel memory begin edit channel memory v iew channel list set the clock magic focus picture formats customize setup video audio theater sel press select to set setup sel customize setup video audio theater cursor select set menu language plug & play set antenna/cable set channel memory begin edit channel memory v iew channel list set the clock magic focus picture formats installing channel 110 88% complete http://www..net/ datasheet pdf - http://www..net/
set up setup 36 use this function after set channel memory is completed to add or erase additional channels to the remote control channel or buttons. add or erase additional channels while still in edit channel memory using channel or or the number buttons to change the channel. press exit to quit menu or cursor to return to previous menu. edit channel memory menu to menu bar to quit exit menu to menu bar to quit exit set menu language plug & play set antenna/cable channel 3 set channel memory add edit channel memory erase v iew channel list next ch set the clock ch ch magic focus or # keys picture formats menu to menu bar to quit exit set menu language plug & play set antenna/cable channel 3 set channel memory add edit channel memory erase v iew channel list set the clock magic focus picture formats menu to menu bar to quit exit customize setup video audio theater sel press select to set setup sel press select to set setup sel press select to set setup sel cursor cursor select set menu language plug & play set antenna/cable channel 3 set channel memory add edit channel memory erase v iew channel list next ch set the clock ch ch magic focus or # keys picture formats set menu language plug & play set antenna/cable channel 3 set channel memory add edit channel memory erase v iew channel list next ch set the clock ch ch magic focus or # keys picture formats http://www..net/ datasheet pdf - http://www..net/
set up setup 37 this function allows you to review which channels are labeled in name the channel, which have been added to edit channel memory (scan), and which are protected by set parental locks. press cursor or to review more channels. press exit to quit menu or cursor to return to previous menu. view channel list v iew channel list ant a ch id scan lock 1 espn on -- 2 abc on -- 3brvoon on 4 cbs on -- 5 **** -- -- 6 cnn on -- 7 com on on 8 esp2 on -- v iew channel list ant a ch id scan lock 9 hbo on -- 10 hgtv on -- 11 fox on -- 12 bet on -- 13 amc on -- 14 hsn on on 15 **** -- -- 16 fam on -- menu to menu bar to quit exit menu to menu bar to quit exit menu to menu bar to quit exit customize setup video audio theater sel customize setup video audio theater sel customize setup video audio theater sel cursor cursor set menu language plug & play set antenna/cable set channel memory edit channel memory v iew channel list set the clock magic focus picture formats note: each touch of cursor or will display the next eight channels. http://www..net/ datasheet pdf - http://www..net/
set up setup 38 the time must be set before you can set program timer or tv time out. use cursor or to set the time, date, and year. press cursor or to change position. press exit to quit menu or cursor to return to previous menu when the cursor is in the first position. set the clock set the clock - - - - am jan 01 2001 set the clock 12:00 pm may 10 2001 menu to menu bar to quit exit menu to menu bar to quit exit menu to menu bar to quit exit customize setup video audio theater sel cursor cursor set menu language plug & play set antenna/cable set channel memory edit channel memory v iew channel list set the clock magic focus picture formats to set time setup sel to set time setup sel http://www..net/ datasheet pdf - http://www..net/
set up setup 39 y our hitachi projection tv has three color projection tubes: one for red, one for green, one for blue. when mixed together in the proper proportion, the output of these three color tubes can produce any color. to produce these colors, however, the beams mu st be precisely aligned over each other so that the colors can be mixed. the process of aligning these picture beams is called ?conv ergence?. over a period of time, the picture tubes can drift out of alignment due to normal bumps and vibrations or moving the tv. if yo u move your tv, or if, after a time, you notice color rings or halos around objects in the picture, you may want to converge (align) t he colors. properly converged, the lines appear white, which is actually a combination of the outputs of the three color tubes. the outpu t of the green tube is stationary. the outputs of the red and blue tubes can be adjusted. when properly aligned, the outputs of all thr ee tubes should be directly over each other to produce the white lines. to simplify convergence, hitachi incorporates a function called magic focus located on the front control panel, which allows th e tv to self-adjust. press this magic focus button and the convergence self adjustment willl start and this process will take approximately 40 seconds. if this button is pressed during this process, no change in picture quality will occur. after this 40 second self-adjust period, picture quality will be optimum. (do not move the tv during self-adjust.) y ou may also select magic focus from the setup menu. notes: 1. for magic focus to perform at it?s best, the television must be turned ?on? and heat run for a minimum of 20 minutes before pressing magic focus on the front panel. 2. only a momentary press of the magic focus button is necessary to start auto digital convergence. at anytime during this convergence correction process, you may press the magic focus button to exit the magic focus mode. magic focus magic focus magic focus http://www..net/ datasheet pdf - http://www..net/
set up setup 40 the picture formats function is very useful when setting up reception high definition, standard definition and ntsc signals. v. position adjust this when viewing a component: y-p b p r signal. this feature is used to center an hdtv video signal between the top and bottom gray bars. adjustable range is -10 (video center is toward bottom of screen) to +10 (video center is toward top of scre en). press cursor or to highlight then press the select button to set. press exit to quit menu or cursor to return to previous menu. picture formats picture formats ant a 6 aspect style aspect 1 aspect 2 aspect 3 aspect 4 aspect 5 v. position +5 comp color type hdtv sdtv/dvd v ideo display 1080i 540p menu to menu bar to quit exit menu to menu bar to quit exit menu to menu bar to quit exit press select to set press select to set setup sel setup sel customize setup video audio theater sel picture formats ant a 6 aspect style aspect 1 aspect 2 aspect 3 aspect 4 aspect 5 v. position +5 comp color type hdtv sdtv/dvd v ideo display 1080i 540p cursor cursor select set menu language plug & play set antenna/cable set channel memory edit channel memory v iew channel list set the clock magic focus picture formats note: 1. depending on the input signal, some of the aspect features will be grayed out. this means that the feature is not available with the signal input. 2. set up a component signal (connect component to y-p b p r inputs) and switch to video: 4 or 5 by pressing the v ideo:4 or 5 button on the remote control when planning to use all picture formats feature. aspect 1 - display the actual (normal 4x3 or 16x9) inputted signal mode. aspect 2 - stretch the signal to 16x9 format. aspect 3 - zoom in on aspect 1 mode. aspect 4 - zoom in on aspect 2 mode. aspect 5 - when 1080i signal is inputted, this is the true 1080i signal. http://www..net/ datasheet pdf - http://www..net/
set up setup 41 4x3 480i aspect 1 540p/1080i aspect key aspect key input aspect 1 (4x3 mode) aspect 2 (16x9 mode) aspect key aspect key aspect 4 (zoom 2 mode) aspect 3 (zoom 1 mode) aspect 3 540p/1080i aspect 4 540p/1080i normal aspect key aspect key aspect 2 405p/810i letter 16x9 480i input aspect key aspect key aspect 1 (4x3 mode) aspect 2 (16x9 mode) aspect key aspect key aspect 4 (zoom 2 mode) aspect 3 (zoom 1 mode) aspect 3 540p/1080i aspect 4 540p/1080i normal aspect key aspect key aspect 2 405p/810i aspect 1 540p/1080i 4x3 ntsc aspect 1 540p/1080i aspect 3 540p/1080i aspect key aspect key input aspect 1 (4x3 mode) aspect 3 (zoom 1 mode) letter 16x9 ntsc aspect key aspect key input aspect 1 (4x3 mode) aspect 3 (zoom 1 mode) aspect 3 540p/1080i aspect 1 540p/1080i normal press select to set setup sel picture formats y-p b p r : 4 aspect style aspect 1 aspect 2 aspect 3 aspect 4 aspect 5 v. position +5 comp color type hdtv sdtv/dvd v ideo display 1080i 540p menu to menu bar to quit exit input signal press select to set setup sel picture formats y-p b p r : 4 aspect style aspect 1 aspect 2 aspect 3 aspect 4 aspect 5 v. position +5 comp color type hdtv sdtv/dvd v ideo display 1080i 540p menu to menu bar to quit exit press select to set setup sel picture formats y-p b p r : 4 aspect style aspect 1 aspect 2 aspect 3 aspect 4 aspect 5 v. position +5 comp color type hdtv sdtv/dvd v ideo display 1080i 540p menu to menu bar to quit exit press select to set setup sel picture formats y-p b p r : 4 aspect style aspect 1 aspect 2 aspect 3 aspect 4 aspect 5 v. position +5 comp color type hdtv sdtv/dvd v ideo display 1080i 540p menu to menu bar to quit exit press select to set setup sel picture formats y-p b p r : 4 aspect style aspect 1 aspect 2 aspect 3 aspect 4 aspect 5 v. position +5 comp color type hdtv sdtv/dvd v ideo display 1080i 540p menu to menu bar to quit exit press select to set setup sel picture formats y-p b p r : 4 aspect style aspect 1 aspect 2 aspect 3 aspect 4 aspect 5 v. position +5 comp color type hdtv sdtv/dvd v ideo display 1080i 540p menu to menu bar to quit exit normal (1) ntsc input - ant a/b, vid1 ~ vid5, - 4x3 format (2) 480i input - ant a/b, input 4/5 (component) - 4x3 format picture formats depending on the input signal, the picture format aspect ration allows you to adjust the image through the following options. http://www..net/ datasheet pdf - http://www..net/
set up setup 42 4x3 480p aspect 1 540p/1080i aspect key aspect key input aspect 1 (4x3 mode) aspect 2 (16x9 mode) aspect key aspect key aspect 4 (zoom 2 mode) aspect 3 (zoom 1 mode) aspect 3 540p/1080i aspect 4 540p/1080i normal aspect key aspect key aspect 2 405p/810i letter 16x9 480p input aspect key aspect key aspect 1 (4x3 mode) aspect 2 (16x9 mode) aspect key aspect key aspect 4 (zoom 2 mode) aspect 3 (zoom 1 mode) aspect 3 540p/1080i aspect 4 540p/1080i normal aspect key aspect key aspect 2 405p/810i aspect 1 640p/1080i press select to set setup sel picture formats y-p b p r : 4 aspect style aspect 1 aspect 2 aspect 3 aspect 4 aspect 5 v. position +5 comp color type hdtv sdtv/dvd v ideo display 1080i 540p menu to menu bar to quit exit press select to set setup sel picture formats y-p b p r : 4 aspect style aspect 1 aspect 2 aspect 3 aspect 4 aspect 5 v. position +5 comp color type hdtv sdtv/dvd v ideo display 1080i 540p menu to menu bar to quit exit press select to set setup sel picture formats y-p b p r : 4 aspect style aspect 1 aspect 2 aspect 3 aspect 4 aspect 5 v. position +5 comp color type hdtv sdtv/dvd v ideo display 1080i 540p menu to menu bar to quit exit press select to set setup sel picture formats y-p b p r : 4 aspect style aspect 1 aspect 2 aspect 3 aspect 4 aspect 5 v. position +5 comp color type hdtv sdtv/dvd v ideo display 1080i 540p menu to menu bar to quit exit comp color type the comp color type function allows you to automatically change tint and color coordinate for dtv programs. hdtv - high definition television - use for high vision signal y-p b p r from hdtv set-top box. sdtv /dvd - standard definition television or digital video disc y-c b c r such as dvd (digital video disc player). v ideo display the video display feature allows you to display 1080i or 540p signal mode. this feature is not available if aspect 5 (1080i thr ough mode) is selected. note: 1. if comp color type is set improperly (does not match actual input signal), the color and tint of the main picture will be abnormal. 2. you must be tuned to video: 4 or 5 input and have a component hooked up to the y-p b p r input jacks to access all picture formats menu. 3. all settings will affect only the component input you are currently viewing. if you are using both sets of component input jacks, be sure to set the picture formats feature for both inputs (set video:4 and video:5). 4. aspect 5 is for 1080i signal format only. selecting aspect 5 allows the 1080i signals to appear on the tv screen as the broadcaster sends them. aspect 5 does not allow the 1080i to go to the tv?s internal flex converter. 5. aspect 5 must be selected from the osd menu at all times. the aspect button on the remote control will skip the aspect 5 feature. 6. using aspect 5 will shorten the life of the prt guns due to no gray panel at the top and bottom of the tv screen. (3) 480p input - input 4/5 (component) - 4x3 format http://www..net/ datasheet pdf - http://www..net/
customize customize 43 customize this selection contains advanced features which will make tv viewing easier and more enjoyable. use this feature to give up to 20 channels a name when antenna signal source is selected and up to 60 channels a name when catv signal source is selected. press cursor to highlight channel names. press cursor to select preset channel names. press cursor to scroll through the preset channel names. press the select button to select desired channel name. to customize channel names, select custom name. press cursor or to select letter. press cursor or to change character position. ( * ) represents a blank space. press channel or and the number buttons to label additional channels. press exit to quit menu or cursor to return to previous menu when the cursor is in the first position. select reset to erase a channel names. notes: 1. if ant a and ant b are in the same antenna/cable mode (see page 34), the channel names for both antenna inputs will be the same. 2. channel names will be displayed only when channel is displayed as main picture. name the channel menu to menu bar to quit exit menu to menu bar to quit exit menu to menu bar to quit exit menu to menu bar to quit exit customize setup video audio theater sel customize setup video audio theater sel cursor cursor menu cursor name the channels ch 22 channel names custom name reset next ch ch ch or # keys name the channels name the inputs set favorite ch. set parental locks set program timer video input sensor closed caption menu background name the channels ch 22 channel names a&e custom name abc reset amc ap next ch bet ch ch brvo or # keys name the channels ch 22 channel names a&e custom name abc reset amc ap next ch bet ch ch brvo or # keys scroll to a channel name and press select sel customize change the channel using ch+, ch- or the number keys sel customize cursor http://www..net/ datasheet pdf - http://www..net/
customize customize 44 use this feature to give a name to any of the five video inputs. press cursor to highlight name the inputs. press cursor to select preset name the inputs. press cursor or to scroll through the preset input name list. press down on cursor to select desired input name. to customize input name, select custom. press cursor to select the video input to be named. press cursor or to select letters. press cursor or to change position. press the select button to set. press exit to quit menu or cursor to return to previous menu when the cursor is in the first position. ( * ) represents a blank space. select reset to set input names to original condition. note: input name will be displayed only when video input is displayed as main picture. name the inputs menu to menu bar to quit exit menu to menu bar to quit exit menu to menu bar to quit exit menu to menu bar to quit exit customize setup video audio theater sel cursor cursor cursor name the inputs vid 1 vid 2 vid 3 vid 4 vid 5 input name list custom reset name the channels name the inputs set favorite ch. set parental locks set program timer video input sensor closed caption menu background name the inputs vid 1 vid 2 vid 3 vid 4 vid 5 input name list cam custom cbl reset dvd ld sat stb name the inputs vid 1 vid 2 vid 3 vid 4 vid 5 input name list cam custom cbl reset dvd ld sat stb customize setup video audio theater sel press select to set sel customize press select to set sel customize http://www..net/ datasheet pdf - http://www..net/
customize customize 45 this function allows you to group your favorite channels into six personalized categories that you can rename. a total of 36 channels can be stored in the favorite channels function. channel stored with channel memory will automatically be stored in favorite channels. to rename the categories, use the cursor to highlight the category you would like to rename. use cursor or to change a letter and cursor to select the next character to change. to enter a channel into a category, highlight the channel location to be stored. press channel or or the number buttons to enter the desired channel. repeat until category has been set with your favorite channels. the channel to be added is displayed in the top right corner of the screen. enter channel 00 to erase a favorite channel. to reset categories and channels back to original factory preset, press status while you are renaming a category. set favorite channels menu to menu bar to quit exit menu to menu bar to quit exit menu to menu bar to quit exit up/down to change letter sel cursor cursor set favorite ch. ch 3 movies sports news 31233 61545 821 11 28 12 30 13 32 set favorite ch. ch 3 movies sports news 31233 61545 821 11 28 12 30 13 32 name the channels name the inputs set favorite ch. set parental locks set program timer video input sensor closed caption menu background customize setup video audio theater sel customize setup video audio theater sel customize note: 1. this function cannot be accessed when ant b is the main channel. 2. when the input source is not ant a, the message ?please switch to ant a? will appear. 3. each category contains 2 groups of 3 channels, for a total of 6 channels per category. http://www..net/ datasheet pdf - http://www..net/
customize customize 46 use this function to display favorite channel selections as sub-pictures or to tune the main picture to a desired favorite channel. select a category using cursor or . press menu and the category will be displayed as sub-pictures at the right edge of the screen. this is useful for previewing a category. use cursor , , or to highlight a favorite channel and the tv will automatically tune to that channel. press exit to remove favorite channels osd from the screen. note: 1. if a category has some blank channel entries, these channels will appear as black sub-pictures. 2. each category contains 2 groups of 3 channels. pressing the menu button will display only 1 group per category, depending on which group you select. 3. when closed caption is set to auto and mute is on, favorite channel can not be accessed. fa vorite channels (operation) menu to surf to quit exit menu to surf to quit exit menu to surf to quit exit cursor cursor menu set favorite ch. ch 12 movies 3 6 8 11 12 13 3 6 8 ch 3 movies 3 6 8 11 12 13 11 12 13 ch 11 movies 3 6 8 11 12 13 http://www..net/ datasheet pdf - http://www..net/
customize customize 47 this function will block out the picture and sound of the selected channel or video input. it can also be used to keep the tv from being viewed for a scheduled amount of time that you set. the code to enter set parental locks is a four digit secret code number. the factory preset code is 0000. use the number buttons to select secret code. set parental locks menu to menu bar to quit exit menu to menu bar to quit exit menu to menu bar to quit exit use number buttons to enter secret code sel press select to set sel cursor 0 0 0 0 name the channels name the inputs set favorite ch. set parental locks set program timer video input sensor closed caption menu background set parental locks - - - - enter secret code channel 3 video lock quick lock front panel lock set time lock movie ratings lock tv ratings lock canadian ratings (eng) canadian ratings (frn) set parental locks ---- change secret code? channel 3 video lock quick lock front panel lock set time lock movie ratings lock tv ratings lock canadian ratings (eng) canadian ratings (frn) customize setup video audio theater sel customize customize note: 1. if ant a and ant b are in the same signal source mode (see page 34), when a channel is locked, it is locked on both antenna inputs. 2. when using set time lock make sure the clock is set (see page 38). 3. text appears on the screen to indicate that tv timed out (set parental locks) is activated. use cursor or to highlight function and then press select button to set on or off. when channel is turned on, the picture and sound for the chosen channel will be blocked out. when video lock is turned on, the picture and sound for all video inputs will be blocked out. to lock the video inputs, you mus t be tuned to any video input. when quick lock is turned on, the picture and sound for channels 3, 4 and all video inputs will be blocked out. when front panel lock is turned on, all buttons on the front panel will be deactivated, except the power button. when tv time out is turned on, you can set the begin and end times and the tv cannot be viewed during that time period. (set clock first.) use cursor or to highlight once (tv will time out one time only), daily (tv will time out every day), weekly (tv will time out one time a week) or off (to disable this function) and then press select to select your choice. when movie ratings is selected, you can block various types of movies and video tapes based on motion picture ratings. picture - in-picture will also be blocked automatically. (see page 48) when tv rating is selected, various types of television programming based on a parental guide ratings will be blocked. picture - in picture will also be blocked automatically. (see page 49) use canadian ratings to block various types of movies and television programs based on the two rating systems used in canada that you feel may be inappropriate due to its content. (see pages 50 and 51) to change the secret code number, select change secret code. enter a new four digit key number you prefer. if you forget your secret code, use the factory code 7777 to erase your key number. this will reset the secret code number back to the factory preset 0000. press exit to quit menu or cursor to return to previous menu. http://www..net/ datasheet pdf - http://www..net/
customize customize 48 use movie ratings to eliminate from viewing, any movie that you feel may be inappropriate due to its content. use cursor or to select the movie rating category that you want to block. press select to block the movie rating that you have selected. once rating is selected, for example pg-13, all movies rated pg-13 and higher (r, nc-17, and x) will be blocked. press exit to quit menu or cursor to return to the previous menu. note: means rating is viewable, means rating is selected. view block movie ratings customize setup video audio theater sel menu to menu bar to quit exit menu to menu bar to quit exit sel customize cursor cursor view view view block block block block movie ratings lock g pg pg-13 r nc-17 x not rated (nr) set parental locks - - - - enter secret code channel 3 video lock quick lock front panel lock set time lock movie ratings lock tv ratings lock canadian ratings (eng) canadian ratings (frn) press select to set contains no rating. not rated (nr) and not applicable (na) programs. movie has not been rated or ratings do not apply. restricted . under 17 requires accompanying parent or adult guardian. parents strongly cautioned . some material may be inappropriate for children under 13. parental guidance suggested . some material may not be suitable for children. general audiences. all ages admitted. adults only no one 17 and under admitted. g pg pg-13 r nc-17 x not rated (nr) motion picture rating chart http://www..net/ datasheet pdf - http://www..net/
customize customize 49 tv ratings customize setup video audio theater sel menu to menu bar to quit exit menu to menu bar to quit exit cursor cursor set parental lock **** change secret code channel 3 video lock quick lock front panel lock set time lock movie ratings lock tv ratings lock canadian ratings (eng) canadian ratings (frn) tv ratings lock: rating content rating status d l s v fv tv-y block tv-y7 block b tv-g block tv-pg block bbbb tv-14 block bbbb tv-ma block bbb sel customize press select to set tv parental guide rating chart use tv ratings to eliminate from viewing any tv program that you feel may be inappropriate due to its content. use cursor or to highlight the category that you want to block. press select to block the tv rating that you have selected. press exit to quit menu or cursor to return to the previous menu. note: ?v? is to view. ?b? is to block. parental guidance suggested. the program may contain infrequent coarse language, limited violence, some suggestive sexual dialogue and situations. directed to older children. themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of 7. all children. the themes and elements in this program are specifically designed for a very young audience, including children from ages 2-6. not rated. see customer caution. general audience. it contains little or no violence, no strong language, and little or no sexual dialogue or situations. nr tv-y tv-y7 tv-g tv-pg tv-14 tv-ma parents strongly cautioned . this program may contain sophisticated themes, intense sexual situation, more intense violence and intensely suggestive dialogue. mature audiences only. this program may contain mature themes, indecent language, graphic violence, and explicit sexual content. fantasy violence v iolence sexual situation adult language sexually suggestive dialogue. fv v s l d the tv rating system that is used in this set is capable of blocking ?nr? programs (non-rated, not applicable and none) per fcc rules section 15.120(e)(2). if the option of blocking ?nr? programs is chosen ?unexpected and possibly confusing results may occur, and you may not receive emergency bulletins or any of the following types of emergency bulletins (such as eas messages, weather warnings and others) locally originated programming news political public service announcements religious sports w eather customer caution note: if you block tv-14d, you will still permit tv ma programs; if you block tv-14dv, you will automatically block tv-mav programs, but you will still permit tv- mals programs. this means that the tv will block violence in tv-14 and higher (tv-ma), but not language and http://www..net/ datasheet pdf - http://www..net/
customize customize 50 canadian ratings (eng) customize setup video audio theater sel menu to menu bar to quit exit menu to menu bar to quit exit cursor cursor set parental control - - - - change secret code? channel 3 video lock quick lock front panel lock set time lock movie ratings lock tv ratings lock canadian ratings (eng) canadian ratings (frn) canadian ratings (eng) c c8+ g pg 14+ 18+ view block block block block block sel customize press select to set canadian english ratings chart use canadian ratings (eng) to block various types of movies and television programs used in canada that you feel may be inappropriate due to its content. use cursor or to select the canadian ratings (eng) category that you want to block. press select to set the canadian ratings (eng) that you have selected. once rating is selected, for example c8+, all movies and television programs rated c8+ and higher (g, pg, 14+ and 18+) will be blocked automatically. note: means rating is viewable, means rating is selected. view block c c8+ g pg 18+ 14+ programming intended for children under age 8 - v iolence guidelines; careful attention is paid to themes, which could threaten children?s sense of security and well- being. there will be no realistic scenes of violence. depictions of aggressive behaviour will be infrequent and limited to portrayals that are clearly imaginary, comedic or unrealistic in nature. other content guidelines: there will be no offensive language, nudity or sexual content. programming generally considered acceptable for children 8 years and over to watch on their own - v iolence guidelines: violence will not be portrayed as the preferred, acceptable, or only way to resolve conflict; or encourage children to imitate dangerous acts which they may see on television. any realistic depictions of violence will be infrequent, discreet, of low intensity and will show the consequences of the acts. other content guidelines: there will be no profanity, nudity or sexual content. general audience - v iolence guidelines: will contain very little violence, either physical or verbal or emotional. will be sensitive to themes which could frighten a younger child, will not depict realistic scenes of violence which minimize or gloss over the effects of violent acts. other content guidelines: there may be some inoffensive slang, no profanity and no nudity. parental guidance - programming intended for a general audience but which may not be suitable for younger children. parents may consider some content inappropriate for unsupervised viewing by children ages 8-13. violence guidelines: depictions of conflict and/or aggression will be limited and moderate; may include physical, fantasy, or supernatural violence. other content guidelines: may contain infrequent mild profanity, or mildly suggestive language. could also contain brief scenes of nudity. programming contains themes or content which may not be suitable for viewers under the age of 14 - parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and early teens. violence guidelines: may contain intense scenes of violence. could deal with mature themes and societal issues in a realistic fashion. other content guidelines: may contain scenes of nudity and/or sexual activity. there could be frequent use of profanity. adult - v iolence guidelines: may contain violence integral to the development of the plot, character or theme, intended for adult audiences. other content guidlines: may contain graphic language and explicit portrayals of nudity and/or sex. http://www..net/ datasheet pdf - http://www..net/
customize customize 51 canadian ratings (frn) customize setup video audio theater sel menu to menu bar to quit exit cursor cursor set parental lock - - - - change secret code? channel 3 video lock quick lock front panel lock set time lock movie ratings lock tv ratings lock canadian ratings (eng) canadian ratings (frn) menu to menu bar to quit exit g 8 ans + 13 ans + 16 ans + 18 ans + canadian ratings (frn): view view view view view sel customize press select to set canadian french ratings chart use canadian ratings (frn) to block canadian french programs according to various program ratings that you feel may be inappropriate due to its content. use cursor or to highlight the category that you want to block. press select to set the canadian ratings (frn) that you have selected. press exit to quit menu or select cursor to return to the previous menu. 8 + general - not recommended for young children - programming intended for a broad audience but contains light or occasional violence that could disturb young children. v iewing with an adult is therefore recommended for young children (under the age of 8) who cannot differentiate between real and imaginary portrayals. general - programming intended for audiences of all ages. contains no violence, or the violence content is minimal or is depicted appropriately with humor or caricature or in an unrealistic manner. programming restricted to adults - contains constant violence or scenes of extreme violence. programming is not suitable for children under the age of 16 - contains frequent scenes of violence or intense violence. g 8 ans + 13 ans + 16 ans + 18 ans + programming may not be suitable for children under the age of 13 - contains either a few violent scenes or one or more sufficiently violent scenes to affect them. viewing with an adult is therefore strongly recommended for children under 13. http://www..net/ datasheet pdf - http://www..net/
customize customize 52 this function will automatically turn the tv on and off, one time only, every day, or once a week. use cursor to select program 1, 2, 3, or 4. use cursor or to select the time the tv will turn on and off. use cursor to change position. use cursor or to select the day of the week you want the timer to turn on tv. (if you set timer to turn on daily, do not need to set day of week). use cursor or , channel ( )or( ), or number buttons to set the channel the tv will tune to when it automatically turns on. use cursor or to highlight, then press the select button to select mode once (tv will turn on/off one time only), or mode daily (tv will turn on/off at the same time every day), weekly (tv will turn on/off at same time every week) or off (to disable t his function). press exit to quit menu or cursor to return to previous menu. if the clock is not set, you can not use this function and the screen below will appear. note: 1. the off timer will only activate if the tv was turned on or tuned with the on timer and no channel selection was made after this time. if you change the channel after the on timer has been activated, the off timer will deactivate. 2. if no remote control button is pressed after on timer is activated, the tv will automatically turn off after three hours. caution: do not use your tv as a deterrent when away from home by using the on and off timers. for safety, the tv should be turned off when you are away from home. set program timer menu to menu bar to quit exit menu to menu bar to quit exit menu to menu bar to quit exit set program timer 1 2 3 4 --:-- am tv on --:-- am tv off sun (day of week) -- channel once daily weekly off customize setup video audio theater sel press select to set sel cursor cursor select set program timer 1 2 3 4 --:-- am tv on --:-- am tv off sun (day of week) -- channel once daily weekly off name the channels name the inputs set favorite ch. set parental locks set program timer video input sensor closed caption menu background press select to set sel customize customize menu to menu bar to quit exit set program timer please set clock first customize setup video audio theater sel http://www..net/ datasheet pdf - http://www..net/
customize customize 53 use this function to automatically turn the tv on and tune to video: 4 when it detects a video input. use cursor or , then press the select button to change video input sensor setting. when auto is selected, the tv will turn on and tune to video: 4 automatically, when the video: 4 input device is turned on. thi s is convenient when you want to watch a movie with your vcr, laserdisc player, or dvd player. when remote is selected, the tv will turn on and tune to video: 4 automatically, when the video: 4 input device is turned on and the vcr, laserdisc, or dvd play button on your remote control is pressed. this is convenient when you want to record a movie with your vcr and watch it later. select off to disable this function. press exit to quit menu or cursor to return to previous menu. video input sensor notes: 1. once the tv has been turned on using the video input sensor feature, it must be reset before video input sensor is used again. to do this, turn your vcr, laserdisc, or dvd player off. this feature is now reset and will turn on your tv as described above. 2. when using remote mode, any remote control button will substitute for your video input device play button. however, intended operation is for use with your vcr, laserdisc, or dvd play button. 3. if no remote control button is pressed after the tv is turned on by video input sensor, the tv will automatically turn off after three hours. menu to menu bar to quit exit menu to menu bar to quit exit customize setup video audio theater sel press select to set sel cursor name the channels name the inputs set favorite ch. set parental locks set program timer video input sensor video: 4 closed caption auto menu background remote off name the channels name the inputs set favorite ch. set parental locks set program timer video input sensor video: 4 closed caption auto menu background remote off customize http://www..net/ datasheet pdf - http://www..net/
customize customize 54 display: on/off will turn the display on or off. auto will turn the display on when mute/soft mute is on. mode: c.c. (closed caption) is for the program you are viewing. text is for additional information such as news reports or a tv program guide. this information covers the entire screen and viewing the tv program is not possible. text may not be available with every program. channel: 1 is used for the primary language (usually english). 2 is sometimes used for a second language (may vary by region). use cursor , to highlight the function to change then press the select button to change the function. press exit to quit menu or cursor to return to previous menu. closed captions are the dialogue, narration, and/or sound effects of a television program or home video which are displayed on the tv screen. your local tv program guide denotes these programs as or . closed caption menu to menu bar to quit exit menu to menu bar to quit exit customize setup video audio theater sel press select to set sel cursor name the channels name the inputs set favorite ch. set parental locks set program timer video input sensor closed caption menu background closed caption display off on auto mode c.c. text channel 12 customize this function allows you to choose from two menu backgrounds. use cursor or to highlight menu background setting, and press the select button to select setting. press exit to quit menu or cursor to return to previous menu. select dark gray and a dark gray background is visible (no picture can be seen behind menu screen), select shaded and a light background is visible. menu background menu to menu bar to quit exit menu to menu bar to quit exit customize setup video audio theater sel press select to set sel cursor name the channels name the inputs set favorite ch. set parental locks set program timer video input sensor closed caption dk. gray menu background shaded name the channels name the inputs set favorite ch. set parental locks set program timer video input sensor closed caption dk . gray menu background shaded customize note: 1. closed caption will not work when viewing a 480p, 720p, or 1080i input via the component: y-p b p r inputs. 2. when pip surf is on, closed caption will not work. http://www..net/ datasheet pdf - http://www..net/
video video 55 video select video to adjust picture settings and improve picture quality. use this function to change the contrast between black and white levels in the picture. this adjustment will only affect the picture when advanced settings perfect picture is off. (see page 56) use the cursor or to highlight the function to be adjusted. press the cursor or to adjust the function. press exit to quit menu. note: if contrast is selected, you are adjusting contrast. the additional menu items brightness, color, tint, and sharpness can be selected and adjusted in the same manner. use this function to adjust the level of color in the picture. use this function to adjust overall picture brightness. when reset is selected, press the select button to return video adjustments to factory preset conditions. contrast color brightness reset menu to menu bar to quit exit menu to menu bar to quit exit 100% 50% 50% 50% 100% customize setup video audio theater sel cursor cursor menu contrast contrast brightness color tint sharpness reset advanced settings note: 1. it may be necessary to adjust tint to obtain optimum picture quality when using the component video y-p b p r input jacks. 2. if you are using the component video input jacks (y-p b p r ) and notice that the tint and color are abnormal, check to make sure that picture formats - component color type is set properly. (see page 40) use this function to adjust flesh tones so they appear natural. tint use this function to adjust the amount of fine detail in the picture. sharpness http://www..net/ datasheet pdf - http://www..net/
video video 56 y our hitachi projection tv has a perfect picture function which will automatically adjust picture settings to produce the highest quality picture possible. when perfect picture is highlighted, press the select button to turn the perfect picture on or off. use cursor or to select function. press the select button to select the function setting. when the function has an ? ? in the box, it is on. press the select button to change color temperature setting. when the function shows a ? ?, it is selected. press exit to quit menu or cursor to return to previous menu. perfect picture when the perfect picture function is on, the tv?s internal computer will perform the following: 1. automatically monitor and adjust contrast depending on room lighting (sensor is located in the front panel) to produce a more natural picture. 2. automatically monitor and adjust color levels and maintain natural flesh tones. 3. automatically compensate for weak or strong tv signals to produce a clear picture. t urn the perfect picture function off to control other preference settings. auto color the auto color function automatically monitors and adjusts the color to maintain constant color levels even after a program or channel changes. it also maintains natural flesh tones while preserving fidelity of background colors. (this function will auto matically set to on and cannot be turned off when the perfect picture function is on.) noise reduction the noise reduction function automatically reduces conspicuous noise in the picture without degrading picture quality. (this function will automatically be set to on and cannot be turned off when the perfect picture function is on.) velocity modulation the velocity modulation function automatically enhances the edges between light and dark areas. black level expansion the black level expansion function automatically enhances shadow detail in dark scenes. color temperature set this to warm for hotter colors with more red, set to cool for less intense colors with more blue, or set to standard for sta ndard color. advanced settings menu to menu bar to quit exit menu to menu bar to quit exit menu to menu bar to quit exit 100% 50% 50% 50% customize setup video audio theater sel video sel press select to set video sel press select to set cursor cursor cursor advanced settings perfect picture auto color noise reduction velocity modulation black level expansion color temperature cool warm standard advanced settings perfect picture auto color noise reduction velocity modulation black level expansion color temperature cool warm standard contrast brightness color tint sharpness reset advanced settings http://www..net/ datasheet pdf - http://www..net/
audio audio 57 select audio to adjust the tv to your preference and to improve the sound quality. audio exit exit 90% 50% bass treble balance reset advanced settings 50% 50% customize setup video audio theater sel customize setup video audio theater sel cursor menu cursor menu to menu bar to quit menu to menu bar to quit bass treble balance reset advanced settings this function controls the low frequency audio to all speakers. use cursor or to highlight the function to be adjusted. press cursor or to adjust the function. press exit to quit menu. note: if bass is selected you are adjusting bass. the additional menu items treble and balance can be selected and adjusted in the same manner. this function controls the high frequency audio to all speakers. this function will control the left to right balance of the tv internal speakers and the audio to hi fi output. when reset is selected, press the select button to return audio adjustments to factory preset conditions. bass balance reset treble http://www..net/ datasheet pdf - http://www..net/
audio audio 58 use advanced settings to improve the sound performance of your tv, depending on listening conditions. mts mode multi-channel television sound will allow you to select stereo (a stereo broadcast), mono (monaural sound) used when receiving a weak stereo broadcast or sap (second audio program) which may be a secondary language, weather report, etc. the sources received will be displayed at the top center edge of the tv. the source you select will be displayed above the sou rces received. see example below for each selection when both stereo and second audio are received (monaural is always received). press cursor or to highlight a function. press the select button to change the function setting. when the function has an ? ? in the box, it is on. advanced settings menu to menu bar to quit exit menu to menu bar to quit exit menu to menu bar to quit exit 63% 50% customize setup video audio theater sel sel audio press select to set sel audio press select to set cursor cursor select cursor advanced settings stereo mono second audio program internal speakers auto noise cancel loudness perfect volume advanced settings stereo mono second audio program internal speakers auto noise cancel loudness perfect volume bass treble balance reset advanced settings internal speakers this function is useful when first setting up the external speakers, or if you prefer to use only speakers from a separate ster eo system. auto noise cancel this function eliminates the noise between stations. if a channel is tuned and is noisy, this function will automatically elimi nate the audio for that channel. loudness this function will improve the quality of both low and high frequency sounds when listening at low volume levels. perfect volume this function will automatically adjust volume so each channel has the same average volume level. ant 31 news 10:00 pm ant 31 news 10:00 pm stereo selected sap selected mono selected mono stereo st/sa ant 31 news 10:00 pm sap st/sa http://www..net/ datasheet pdf - http://www..net/
theater theater 59 use cursor or to change theater modes settings. when news mode is chosen, the following are automatically set: contrast - 75%, color temperature - warm, loudness - on, perfect volume - on. when movies mode is chosen, the following are automatically set: contrast - 60%, color temperature - standard, bass - 63%, loudness - off, perfect volume - off, surround - srs. . when music mode is chosen, the following are automatically set: contrast - 75%, color temperature - cool, loudness - off, perfect volume - off, surround - srs and bbe. when sports mode is chosen, the following are automatically set: contrast - 100%, color temperature - cool, bass - 63%, loudness - off, perfect volume - off, surround - srs. y ou can customize each of the above modes (news, movie, music and sports) to your preference to increase viewing performance and pleasure, depending upon the video program being viewed. however, if reset is selected, all modes will reset to the initial conditions as explained above. when reset is selected, it will take approximately two seconds to return to factory conditions (sports mode). press exit to quit menu or cursor to return to previous menu. use this function to choose from automatic picture settings to optimize your tv?s performance. theater modes menu to menu bar to quit exit menu to menu bar to quit exit menu to menu bar to quit exit customize setup video audio theater sel theater sel press select to set theater sel press select to set cursor cursor menu cursor theater modes news surround movies music sports reset theater modes news surround movies music sports reset theater modes news surround movies music sports reset theater use this function to choose picture and audio settings for a true home theater experience. note: movie mode 3:2 pulldown detection special feature theatrical movies are shot on film at 24 frames or still pictures per second, instead of 30 frames or 60 fields like video. wh en film is transferred to video for television viewing, the disparity between the two frame rates must be reconciled. this involv es a process known as 3:2 pulldown. when movie mode is selected from the theater menu, your hitachi projection television will activate the circuitry for this special feature to improve video performance when watching film based sources. this 3:2 pulldown detection will only work in movie mode. http://www..net/ datasheet pdf - http://www..net/
theater theater 60 surround the following surround settings will reproduce the ?live? sound you would hear in concert halls, sports stadiums, movie theaters, etc. with only two speakers. to enter the surround mode, use cursor or to highlight then press the select button to select surround mode of your choice. surround off use this for normal stereo/mono broadcasts. based on the principles of the human hearing system, srs technology delivers and exciting and realistic 3d sound experience fro m just two external speakers (or) the two internal speakers of your hitachi television. if your hitachi television is connected to an external audio system, srs will also create an incredible 3d sound experience from two speakers and even enhance a complete multi-speaker surround sound system. t echnology sound reproduction quality enhancement system. the bbe technology produces sound that is natural and crisp from just two speakers (or) the two internal speakers of your hitachi television. if your hitachi television is connected to an external audi o system, bbe will also create an incredible crisp sound experience from two speakers and even more complete and accurate reproduction of the original performance. bbe brings to the listener?s ear a more complete and accurate reproduction of the or iginal performance. each voice, speaking or singing, each instrument or sound effect is presented with its attendant harmonics or par tials more clearly audible. the ear can then more easily recognize the unique tonal colors of each sound as though the sound was bei ng produced live. menu to menu bar to quit exit menu to menu bar to quit exit theater sel press select to set theater sel press select to set cursor theater modes surround srs bbe theater modes surround srs bbe notes: *srs and the symbol are registered trademarks of srs labs, inc. in the united states and selected foreign countries. srs technology is incorporated under license from srs labs, inc. notes: bbe functions the same manner on tv mode and on video mode. notes: licensed by bbe sound, inc. under usp4638258 and 4482866. bbe and bbe symbol are registered trademarks of bbe sound, inc. manufactured under license from bbe sound, inc. http://www..net/ datasheet pdf - http://www..net/
care of your hitachi projection tv and your remote control 61 do dust the screen and cabinet with a soft cloth. clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. a mild soap may be used if the screen is extremely dirty. place your television away from extreme heat, humidity, and extremely dusty places. remove the plug from the wall outlet if your television will not be used for a long period of time, for instances, when you go on vacation. do not do not clean your screen or cabinet with strong cleaners, polishes or a chemically treated cloth. do not place rubber or vinyl products or cellophane tape on your television. do not touch the screen too often. do not subject the remote control to shocks such as dropping it on the floor, etc. physical damage to the precision parts may result. a void placing the remote control in a high humidity place or getting it wet. do not leave it on or near a heater. excessive heat or moisture may cause the unit to cease operation. when the batteries run down, remote control operation will become erratic or possibly stop altogether. replace the old batteries with two new ?aa? size batteries. exposure of the viewing screen to prolonged direct sunlight or heat may cause the screen to permanently warp, resulting in a distorted picture. http://www..net/ datasheet pdf - http://www..net/
62 reception problems ? ignition noise: black spots or horizontal streaks may appear, picture may flutter or drift. usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. ? ghosts: ghosts are caused by the television signal following two paths. one is the direct path and the other is reflected from tall buildings, hills or some other objects. changing the direction or position of the antenna may improve reception. ghosting may also be caused by defects in the antenna system such as unshielded leads or connecting several sets to the same antenna without using multiple antenna couplers. ? snow: if your receiver is located in the fringe area of a television station where the signal is weak, your picture may be marred by the appearance of small dots. when the signal is extremely weak, it may be necessary to install a special antenna to improve the picture. ? radio frequency interference: the interference produces moving ripples or diagonal streaks, and in some cases, causes loss of contrast in the picture. note: the tv set can generate sound distortion in external devices such as a radio. please separate radio equipment from the tv set to a considerable distance. http://www..net/ datasheet pdf - http://www..net/
useful info 63 hitachi projection television incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage power surges. if your television should appear to have a loss of power, please follow this procedure: 1. press the power switch (on/off switch) once. 2. if there is still no power, wait 30 seconds and press the power switch again. 3. if there is still no power, unplug the power cord from the wall. wait 30 seconds and plug the power cord back in. press the power switch again. this protective technology should provide for years of lasting entertainment from your hitachi projection television. symptoms check these items and try these adjustments no picture, no sound sound ok, picture poor picture ok, sound poor picture blurred lines or streaks in picture poor reception on some channels picture rolls vertically no color poor color be sure external connection is correct be sure power cord is plugged in be sure tv is switched''on" t ry another channel (station trouble) check antenna connections (back of tv) check antenna for broken lead-in wire check for local interference check outside antenna adjust contrast control adjust brightness control adjust color control adjust tint control adjust volume control http://www..net/ datasheet pdf - http://www..net/
useful info 64 ?v elocity modulation ? closed caption decoder ? high resolution picture-in-picture with freeze ?t uned port bass reflex speakers ? magic focus (auto digital convergence) ? dual antenna inputs ?v ideo input sensor ?3 dimensional y/c comb filter ? full 1080i hdtv capable when used with a set-top box. ?t echnology. ?t echnology *srs and the symbol are registered trademarks of srs labs, inc. in the united states and selected foreign countries. srs technology is incorporated under license from srs labs, inc. *licensed by bbe sound, inc. under usp4638258 and 4482866. bbe and bbe symbol are registered trademarks of bbe sound, inc. manufactured under license from bbe sound, inc. features: ? superfine picture quality 1280 line horizontal resolution ? pure green and red filter lenses ? perfect picture system ? mulit-picture-in-picture with freeze. ? remote (controls many vcr brands, cable boxes and dvd players.) ? high definition on-screen display (ultratec bit-map) ? on screen plug and play guide ? full set of input jacks, including s-video ? component video: y-p b /p r i nputs: ? power input . . . . . . . . . . . . .ac 120v, 60hz ? power consumption -refer to the rear panel on the back of the tv. ? antenna input impedance . . . . . . . . .75 ohm ? channel coverage . . . . . . . . . . . . . . .181ch. vhf-band . . . . . . . . . . . . . . . . . . . . .2 ~ 13 uhf-band . . . . . . . . . . . . . . . . . . . .14 ~ 69 catv mid band . . . . . . . . . . . . . . .a-5 ~ a-1 . . . . . . . . . . . . . . . . . . . . . . . . . . .a-i super band . . . . . . . . . . . . . . . . . . . . .j-w hyper band . . . . . . . . . . . . . . .w+1 - w+28 ultra band . . . . . . . . . . . . . . .w+29 - w+84 ?v ideo . . . . . . . . . . . . . . . .1.0vp-p, 75 ohm ? s-video luminance (y) . . . . . . . . . .1.0vp-p, 75 ohm chrominance (c) . . . . . .0.286vp-p, 75 ohm ? component video luminance (y) . . . . . . . . . . . . . . .1.0vp-p, 75 ohm chrominance (p b /p r ) . . . . . . . . .0.7vp-p, 75 ohm ? audio input impedance . . . . . . . . . .47k ohm ?a verage input level . . . . . . . . . . . . . . . .470mvrms out puts: ?v ideo . . . . . . . . . . . . . . . . . . . . .1.0vp-p. 75 ohm ? audio (fixed) . . . . . . . . . . . . .470mvrms, 1k ohm dimensions: 43fdx20b 53fdx20b 53sdx20bb ? height (in.) 43 5/8 51 5/8 55 3/4 ?w idth (in.) 38 15/16 46 46 ? depth (in.) 20 1/16 25 1/4 26 1/4 ?w eight (lbs.) 148 223 200 53sdx20b 43FDX15B ? height (in.) 55 3/4 43 5/8 ?w idth (in.) 46 38 15/16 ? depth (in.) 25 20 1/16 ?w eight (lbs.) 225 148 note: due to improvements, specifications in this operating guide are subject to change without notice. http://www..net/ datasheet pdf - http://www..net/
useful info 65 hitachi america, ltd. home electronics division 1855 dornoch court san diego, ca 92154 hitachi america, ltd. home electronics division hitachi has made every effort to assure you hours of trouble free operation from your unit. however, should you require service , a network of hitachi authorized service facilities has been established in all 50 states and puerto rico. each facility will pr ovide you with convenient and expedient assistance. our service hotline operator will direct you to the hitachi authorized service facility nearest you. just present proof of purchase and/or delivery receipts to the hitachi authorized service facility, and s ervice will be rendered in accordance with the terms of the limited warranty as stated on your warranty card or operating guide. should you have any questions regarding warranty, service, operation, or technical assistance, please contact: in canada, please contact: 1-800-hitachi (1-800-448-2244) hitachi (hsc) canada inc. 6740 campobello road mississauga, ont. l5n 2l8 service s e r v i c e to locate an authorized hitachi service facility in the continental u.s.a. and canada, dial toll free 7 days a week, 24 hours a day 8 0 0 h i t a c h i 8 0 0 h i t a c h i (1-800-448-2244) http://www..net/ datasheet pdf - http://www..net/
notes 66 http://www..net/ datasheet pdf - http://www..net/
notes 67 http://www..net/ datasheet pdf - http://www..net/
qr52481 http://www..net/ datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of 43FDX15B

	To Download 43FDX15B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .